Category Archives: wax carving

I Still Exist!

And I’m still making things!

I won’t linger over the details anymore, but I’ve been busy in the metals lab since I stopped keeping up with this blog. Here are a few things I’ve completed.


This is a labradorite bead riveted into a silver frame. I like the look of these riveted projects but I’ve become tired of trying to find long beads that are drilled through cleanly and without chips around the ends (which can cause the rivet to bend and distort.) I had to really ream this one out–but it was so worth it.

 

 

Ah, I finally found something to do with the copper “crazy quilt” disc I made a couple years ago when I was experimenting with copper solder. I really like how this turned out (and I also recently made a bead with nine little texture samples on each side like this, but don’t have a picture.)

 

Here’s a bit of fun made with some scraps. I got the color with a power stripper.

 

Malachite is always good for some drama, I think.

 

Inevitably, when you get a reputation for making jewelry, friends and coworkers come up to you with broken jewelry, hoping you can fix it. This piece is pretty much a copy of a cheap, plated bypass ring that someone I work with wore for years until the band snapped at the point where it adjusts to size. She’d hoped I could fix it–nope. But I thought about it, and made a band that night with a piece of sterling wire and a hammer and a mandrel. From there, I got the OK to recreate the ring (tip: get the shell bits out by heating the back with an alcohol lamp until the epoxy weakens and they fall right out.) She was really pleased with it, and I am too. It was a good learning experience (and I made the band thicker so it won’t break this time!)

 

After I finished the above piece, I still had bypass rings on my mind, so I hammered out one for myself and tried out different stones until I fell in love with the look of this red agate. Soldering was tricky, but I’m getting better all the time.

 

I bought this stone a few years ago and made a few failed attempts to design a pendant and set it (remember?):

 

Well, here she is now! That brass framework was a real . . . challenge. I bought my own solderite board to bring to the studio–perfectly flat, and with grooves carved into it to hold those pieces exactly where I needed them. The end result comes close to what I had in mind all this time. Still waiting for the chain to tarnish a bit, though. I randomly melted some silver solder around for an old, industrial look (note the solder around the joined areas) but it doesn’t quite show up on the links yet.

 

Here’s a fun scrap piece I made with some wire bits I melted together some time ago but never knew what to do with. At one point last spring I was making a simple ring with this stone (and, for the first time, adding a jump ring inside the bezel to make the stone stand taller) when I held it up next to the scrappy bit and thought, “Wow! Perfect!” And that’s how this happened.

 

Remember these old dudes I hammered out back in the day? The two on top became earrings, and I hung onto the big piece for a long time, trying to think up a good necklace idea. A little extra piece and a little crochet later:

I rather wish I hadn’t punched holes in the corners, but I did, and that made what I ultimately came up with a bit more difficult than if, say, I had soldered loops on the back. Still, I’m loving the simplicity of this one. I’m glad I waited on it.

 

I sketched this out last October, hoping to make use of this neat sardonyx cabochon I’d been holding on to. This piece turned out a bit difficult due to its size (and trying to solder on square copper wire bits without silver solder blorps everywhere!) The back has a pin mechanism that was a bit tough–the pieces are so tiny and need to be placed exactly, and you have to be sure not to clog up or fuse the catch during the process . . . but I pulled it off. I even made a pin/pendant converter with a piece of tubing and wire.

 

My teacher, Bob, was recently given a huge box full of jewelry supplies, casting stuff, sterling silver, you name it, from a donor who had retired from jewelry making and didn’t want the stuff anymore. Among the treasures was a spool of 30 gauge argentium which he had no idea what to do with–but knew that I would, as a knitter/crocheter. I ended up buying it off him (with proceeds going back to the studio) and made this crochet cuff with some beads and a sterling frame I made myself. It’s got a bit of beginner’s wonk to it, and I ought to have practiced more before making the real thing because one side of the strip is looser and sloppier than the other, when I started really getting the hang of it. But this was interesting–and I’m in the middle of using the remainder to make a kind of mesh amulet bag from instructions I found in an old Lapidary Journal from the 90s.

And last but so, so not least. Remember when I started futzing around with wax to carve rings?

I finally got these both finished after months of inactivity, messing up one and doing it over, and just generally worrying about doing something wrong and ruining all that work. Last week, they were cast in silver.

They’re still not done (clearly), but man, is it a relief to have gotten this far! They are heavy as hell–I wish I’d carved away more wax on the interior but the wax was getting delicate and I was nervous about breakage. I shouldn’t have been, though. The thing on the left, if you’re wondering, was a slice of ring wax that I’d carved into with a new set of wax working tools as a kind of technical exercise. I figured if I made the design well enough, I’d cast it. And so I did–with a different design on each side. It’ll be a reversible pendant when I’m done.

And that’s about where I am on the jewelry front. As for knitting, I haven’t bothered all that much. I’ve got two pairs of socks made with crazy rainbow yarn I tried to dilute with solid colors, and a clone of my cat.

Pattern: SlipStripe Spiral

 

Pattern: Ugly Duckling Socks

 

Pattern: The Parlor Cat

And that is . . . probably . . . all for now! I’m sure I’ll catch up again in a few months. Until then, keep crafting!

 

Leave a comment

Filed under amigurumi, beads, bracelet, casting, crochet, knitting, metals, necklace, pendant, pin, ring, riveting, socks, soldering, stones/gems, wax carving, yak yak yak

Lazy Chain (and other news)

I had several ideas for making my own chain for this piece I’d been carrying around for a while, but in the end I bought a couple lengths of prefab at the local bead store, twisted them together, popped on a clasp, and called it done.

hornedtoadpendant

The copper bit was a piece I fished out of the studio base metal recycle bin ages ago and hammered up. I spent a lot of time trying to figure out what to do with it, until Bob gave a me a couple of white bronze horned toads he cast years ago from some ready made wax models. I tried one out and the pieces went together perfectly.

IMG_2993

from 2013!

So my big thing lately has been an attempt at a Sydney Lynch-esque box bezel for a beautiful, faceted rutilated quartz stone I bought at the gem and mineral show last year. It was quite the challenge, as I needed to make a step bezel inside to keep the stone in place. This wouldn’t have been such a big deal if the stone were, say, round or perfectly rectangular, but all four sides have a bit of a curve to them, and making a perfect fit was a challenge I kind of failed.

quartzpendantfirsttry

I made both inner and outer boxes from two bent pieces–think L7–soldered together. Only, the inner bezel slipped, so you can see the corner doesn’t meet up properly. And, somehow in all the soldering, the corners of the outer bezels popped open just a bit (and no, trying to fill them with solder didn’t work, and by that time I had got the bail on with a ton of sloppy, extra easy solder, and trying to fix one would just make the other melt and fall off again . . . you get the picture.) The upshot is, I totally could set this stone right now if I wanted to and have an adequate piece of jewelry that no one would really notice the flaws of. But I think the stone deserves better. And I think I learned a few things on this one. So, when I have the energy and drive again, I’ll just do it over. And better.

One last thing on my bench–actually two things. Wax rings I’m carving all by myself.

waxmodels1

So far, so good. I found a good tutorial in an old issue of Art Jewelry magazine and I’m following it step by step. I’m more invested in the ring on the left with the lapis stone; the one on the right I’m using for practice, just in case I do something stupid (and I did, once, accidentally start carving the outer edge before it was time and that messed up my ability to measure other areas a bit.) If things continue to go well . . . ah, but I won’t jinx it. I’m just having a really good time working on jewelry lately, which hasn’t been true for a while.

Leave a comment

Filed under metals, necklace, practice, ring, soldering, stones/gems, wax carving